HomeRemodelCalc

Concrete & Masonry Calculators

Concrete and masonry calculators for slabs, post holes, footings, cinder blocks, and mortar. Get cubic yards, bags, and block counts from your measurements.

The masonry calculators split concrete volume from block counts and from mortar bags, because those are different orders even when they belong to one wall. A slab is an area times a depth. A post hole is a cylinder. A strip footing is a trench. A block wall is a module of face plus joint. Mortar is a coverage per bag, and it should not be added on top of the block page’s rough mortar line.

Concrete bags depend on the yield the bag makes. The form default is 0.6 cu ft for an 80 lb bag. The slab and post-hole tables use 0.60 cubic feet, the yield on the QUIKRETE 80 lb Concrete Mix No. 110180 listing checked on 2026-10-24. Type the yield on the bag you buy.

The English slab form can be a rectangle, a circle, or an L. Post holes stay cylinders and do not subtract the post. Footings stay a length, a width, and a depth. If the footing and the slab are both in the job, calculate them separately and add the volumes. A thickened edge counted in both is a double order.

Gravel under a slab is not masonry in the menu, but it is part of the same hole in the ground. The gravel calculator is the base. This cluster is the concrete and the block above it. Use both pages rather than adding the gravel depth to the concrete depth.

Which calculator do I need?

ProjectCalculatorWhy
Patio, shed base, or any flat pourConcrete slab calculatorCubic metres and bags from area, depth, waste, and bag yield.
Fence or deck postsPost hole calculatorA cylinder per hole, times the count, at the bag yield you enter.
Strip footing or a square padFooting calculatorTrench volume. Add it to a slab only if it is not already inside the slab depth.
Block wallCinder block calculatorBlocks from the face-plus-joint module, plus a rough mortar line.
Mortar from a bag coverageMortar calculatorBags from square feet per bag (square feet per bag on the metric toggle). Do not add this to the block page’s mortar line.

Buying tips

  • Take cubic metres with waste to a ready-mix plant and let them apply their minimum load. The bag count is for bagged mix.
  • Compare bag and bulk prices only by typing both. There is no stored price for a truck or a bag.
  • Use one mortar method. The 15-blocks-per-bag rule and a square-metre coverage are alternatives, not additions.

Questions

Which concrete calculator is the slab?

The concrete slab calculator. Post holes and strip footings have their own pages because a cylinder and a trench are not a floor area.

How many 80 lb bags are in the table?

The slab and post-hole tables use 0.60 cubic feet per bag from the QUIKRETE 80 lb listing checked on 2026-10-24. The form default is the same 0.60 cu ft. Type the yield printed on the bag you buy.

Does the block page include mortar?

It includes a rough one-bag-per-15-blocks figure. If your bag prints a coverage, use the mortar calculator instead and do not add both.

Where is the gravel base?

On the gravel calculator in landscaping. Keep that depth out of the concrete depth.